#260 Quick Rip Tape by PMI

#260 Quick Rip Tape by PMI

#260 Quick Rip Tape by PMI

Hand-tearable with a blue adhesive free edge providing a tab to lift the tape from the screen. Same adhesive and backing as Split Tape allowing for a clean removal. 60 yards per roll. 

No.65 Screen Filler Liquid Blockout

No.65 Screen Filler Liquid Blockout

No.65 Screen Filler Liquid Blockout by Ulano

Water-soluble blockout for medium and fine mesh counts.  Offers better contrast and higher humidity resistance.  Use full strength or dilute with water. (Vibrant Blue)

Click here for User Guide.

 No 60 Screen Filler

Screen Rack

Screen Rack

Screen Rack
•Assembled: 26.25” x 25.50” x 60”

•Holds 20 screen frames, 20 x 24 or 23 x 31
•Moves easily around the shop on rubber wheel casters
•Ships UPS broken down with minimal assembly required

$239

Dual Edge Scoop Coater

Dual Edge Scoop Coater

Features a dual-sided coating edge for a sharp edge thin coat for higher screen mesh or a rounded dull edge for coating lower mesh screens or heat transfers.  Extruded from T5 aluminum, coater is comfortable to handle and sits easily on flat surfaces between coats.  Comes complete with snap-on injection molded end caps as well as a full top snap-on dust cover. 

Order Scoop Coater 1” larger than the area you are coating with emulsion. Your coating area should be 2” (1” on each side) larger than your print area. For optimum results the Scoop Coater should be a total of 3” larger than your print area.

AWT Scoop Coater

SD-10 Series Screen Drying Cabinet

SD-10 Series Screen Drying Cabinet

Workhorse SD-10 Series Screen Drying Cabinet

Dry coated screens in a hurry.  Eliminate dust and dirt that can cause pinholes and imperfections.  This unit holds up to ten screens sized from 20” x 24” up to 25” x 36”.  Perforated steel shelves allow uniform heated air flow.  Insulated double-wall construction with heavy duty lockable casters.  Digital display temperature controller. 
35”D x 43”W x 35”H, 115V, 1 PH, 1,560 Watts, 22 Amps.

 

Click here for Drying Cabinet video.

 

 

 

 

 

or Call 888.245.3810 for details

 

Lexar 50

Lexar 50 by Ulano

Pure photopolymer.  Better imaging properties, longer shelf life, improved solvent resistence.  For mesh counts 86 - 196.  Red in  color.  (Replaces CDF-5)

Click here for Spec Sheet.

 

 

ChromaBlue

ChromaBlue

Chromaline ChromaBlue

 

A pure photopolymer emulsion.  Low Cost Per Screen, Very Fast Exposing, Fast Drying, Solids Content - 50%, Superior Mesh Bridging, Excellent reclaimability, 2 Year Shelf Life, No Mixing!!!  Blue in color. 

Click here for User Guide.

Page 2 of 6 pages  < 1 2 3 4 >  Last ›

Download Catalog