Ink and Emulsion Remover - One Step Clear

Ink and Emulsion Remover - One Step Clear

Franmar One Step Clear Ink and Emulsion Remover for Dip Tank Systems

One Step Clear is a concentrate to be diluted with tap water in the tank: 6 parts water : 1 part concentrate* (* High mineral and/or iron content water mix 4 parts water: 1 part concentrate) Scrape all excess ink from screen. Submerge screen in the tank for 2-4 minutes. Place screen in washout booth and rinse using a pressure washer. Dehazing mesh is recommended as a final step.


•Concentrated formula for use in dip tanks • Removes emulsion, stencil, or capillary film
•Can be used as a direct apply • Removes plastisol, UV, and water based inks
•Safe to reclaim wood, aluminum, or roller frames • Long-lasting (up to 6 months)

 

One Step Clear Neutralizer Powder 1.5 pound

 Add this powder to solution to neutralize the pH level for safe drain disposal.

 

 

 

Scorch Remover

Scorch Remover

Tekmar Texstyle Scorch Remover

Instantly removes scorching, burn marks, and sun-staining from fabrics.  Lightly spray the affected area and cycle the garment through the dryer.

Fast, non-staining, safe.

 

PMI Split Tape for Aluminum Frames

PMI Split Tape for Aluminum Frames

PMI Split Tape for Aluminum Frames

Blue areas on the tape contain no adhesive to keep frames clean and free of adhesive residue.  Tape will not break, tear or shred, which saves time reclaiming.  No release liner to remove, for easy application.  Eliminates costly labor and solvents to clean frames.  Economical to use.  Deluxe dispenser available.

Split tape

Page 26 of 26 pages ‹ First  < 24 25 26

Download Catalog